Jack A6F Kataloğu — Sayfa 17

P22 0-60 oO Threshold of the back sewing function off. P24 o~1024 80 Trimming point of pedal P25 1-120 36 Stitch balance for end back tacking No.1 P26 1-120 20 Stitch balance for end back tacking No.2 P27 one 1 Presser Foot sensor mode setting: 0: off 1: turn on only after trimming 2: always ON P30 0-31 9 Feed forward torque of motor: 0: normal functions 1-31: feed forward torque level P31 40~199 50 Trimming afterburner coefficient (motor afterburner) P32 4~600 400 Thread clamp solenoid full open time (ms) P33 0~100 0 Thread clamp solenoid off time per cycle (ms) P37 0~100 0 Thread clamp solenoid on time per cycle (ms), means the clamp strength. P45 0~100 1 Back stitch electromagnet per cycle opening time (ms) P46 0-400 2 Back stitch electromagnet per cycle closing time (ms) P47 200~360 360 After trimming anti pull (It realizes trimming is pulled back function) P49 100-500 250 Trimming speed P50 4~500 450 Presser foot lifting electromagnet full output time ms P51 0~100 9 Presser foot lifting electromagnet per cycle opening time (ms) P52 4~800 400 Running delay time when presser footer comes down (ms) Presser foot lifting function selection P53 on 4 O: off 1:on P54 0~100 15 Presser foot lifting electromagnet per cycle closing time (ms) Run to up needle position after Power on: P56 on 4 O:no action 1: action PS7 0~600. 100. Presser foot lifting electromagnet protection time 100ms P60 200~4000 3000 The maximum speed of constant sewing (Automatic test speed) Special mode: 0: normal Mode 1: simply sewing mode P62 On PBM 0 2: motor initial angle measurement (Do not remove the belt) 3: Automatically setting the pulley ratio by the CPU. (Synchronizer is necessary and the belt not removed) 4: automatic test modle 1 (It has needle stop position of automatic test, running and stopping 5S) P66 02 2 Safety switch function set: 2:on O:off Slow release lifter level adjustment, the smaller values and the faster quickly (OC open P74 0-50 2 time) P76 1~500 60 Back sewing electromagnet full output time ms P78 1~359 120 Start angle P79 0~359 320 End angle PAO 19999, 5000 The lift foot release down Delay time after remove cloth when sensing turn on. PAt 0~600 50 The lift foot release down Delay time with cloth when sensing turn on. 5/8