Jack A6F Kataloğu — Sayfa 16

Voice navigation key Under the condition of without error: 1, Short pressi#lkey, the Power-on speech function turns on. Then short pressLél key, the Power-on speech function turns off. 2, Long pressiI key, the icon A of LCD is lit, The voice switch function turns on. Then long pressl4] key, The voice switch function turns off. In the case of an error: 1, Short press/lkey: Broadcast navigation voice 3 System parameters setting list 3.1 Parameter mode 1, Inthe standby state ,press ®rey to enter the parameter modes. 2, Press corresponding key ©O and key ®©O to adjust the corresponding parameter. 3, When the parameter values have increased and decreased, parameter interface flash. Short press Brey to save the modified parameters .Long press key to exit parameter interface, return to standby model. No. Range Default Description P99 0-2 4 language selection 0: off, 1: Chinese, 2:English, default language 1 Chinese Pod 200~4000 3500 the maximum speed of free sewing (the global maximum speed) P03 on 1 Needle stop position selection (O:up; 1: down) Poa 200~3000 1500 Start back tacking speed Pos 200~3000 1600 End back tacking speed P06 200~3000 1500 Continuous back sewing speed (W sewing) Po? 5-720 300 Clamp start angle when the small nest open Po8 mn i 0-360 ar Clamp Angle compensation Pos on 8 Soft start switch (0:off; 1: on) POA 100~1200 800 Short trim Speed POB 0-20 1 Short trim needle number Poc 0~359 0 Short trim angle Mode of adding stitch P15 0-2 0 0: continuous ; 1:half stitch; 2:one stitch P16 41-9999 30 Adjust the lift foot response time after the sensor has detected the cloth. Automatic induction presser foot sensor setting (between the maximum and minimum P17 0-99 70 value of the 02C parameter display) P18 1~120 35 Stitch balance for start back tacking No.1(Pull in compensation) P19 1~120 20 Stitch balance for start back tacking No.2(Release of compensation) 4/8