Jack A6F Kataloğu — Sayfa 15

2.2 Key Functions S/L mark Key Name Description Key Name Description Parameter setting key In the boot state, long press ®rey to enter the parameter modes. After modify the parameters, press “key to storage. Then long press rey to exit this mode. Presser foot key Under the normal sewing mode, press ‘ey, switch between cycle sewing midway parking presser foot and sewing after the end of automatic trimming presser foot. Start back tacking setting key Switch during all start tacking type when pressing. (No tacking, single tacking bi double tacking Daal ). The icon of LCD is lit. The number of needle selecting the corresponding keys can be set to A, B segment, default needle number 0~F corresponds to the 0~15 stitch. End back tacking setting key 5 Switch during all end tacking type when pressing. (No tacking, single tacking? , double tacking vt ). The icon of LCD is lit. The number of needle selecting the corresponding keys can be set to C, D segment, default needle number O~F corresponds to the 0~15 stitch. Thread clamp/ sensor for automatic presser foot lifting key iz 1, Short press key, the icon Be of LCD is lit, the thread clamp function turns on. Then short press key, the thread clamp function turns off. m aa 2, Long press key, the icon ce of LCD is lit, the sensor for automatic presser foot i function turns on. Then long press@d key, the sensor for automatic presser foot function turns off. Free sewingArimming 1, Short pressUal key, the free sewing mode is selected. 2, Long press key, the icon Sor LCD is lit, the automatic trimming function turns on. key Then long pressl) key, the automatic trimming function turns off. W bar tacking / 1, Short press ‘ey, the icon hr of LCD is lit, W seam marking function turns on. Multi-section key, the icon Gil of LCD is lit, the multi-section constant-stitch sewing constant-stitch sewing 2, Long press' function turns on. The parameter increment setting key Parameter value increment key. The parameter decrement setting key Parameter value decrement key. The left selection key Parameters selection toward to left key. (In constant-stitch sewing mode, long press this key, One-shot-sewing can be turned on or turned off. ) The right selection key Prameters selection toward to right key. factory reset Insert the hole with the machine needle to touch the switch to restore the factory 3/8