Jack A5 Kataloğu — Sayfa 15

2.2 Key Functionss/L mark Key Name Description Key Name Description Parameter setting key In the boot state, long press “”key to enter the parameter modes. After modify the parameters, press ®key to storage. Then long press key to exit this mode. Presser foot key KA Under the normal sewing mode, press “Bkey, switch between cycle sewing midway parking presser foot and sewing after the end of automatic trimming presser foot. Start back tacking setting key Switch during all start tacking type when pressing. (No tacking, single tacking bi ,double tacking . The icon of LCD is lit. The number of needle selecting the corresponding keys can be setto A, B segment, default needle number 0~F corresponds to the 0~15 stitch. End back tacking Stop position key Short press Key, Switch during all end tacking type when pressing. (No tacking, single lackingM , double tacking bit ). The icon of LCD is lit. The number of needle selecting the corresponding keys can be set to C, D segment, default needle number 0~F corresponds to the 0~15 stitch. Long press Key, Select up/down stop position. Thread clamp/ sensor for automatic presser foot lifting key 7 1, Short press key, the icon R of LCD is lit, the thread clamp function turns on. Then %7 short press key, the thread clamp function turns off. n z 2, Long press key, the icon < of LCD is lit, the sensor for automatic presser foot function turns on. Then long press@ key, the sensor for automatic presser foot function turns off. 5§ Free sewingfrimming key 1, Short press key, the free sewing mode is selected. 2, Long press key, the icon ğğof LCD islit, the automatic trimming function turns on. Then long press key, the automatic trimming function turns off. ) W bar tacking / Multi-section constant-stitch sewing " 1, Short pressBlkey, the icon Haai of LCD is lit, W seam marking function turns on. 2, Long presslElkey, the icon m of LCD islit, the multi-section constant-stitch sewing function turns on. The parameter increment setting key Parameter value increment key. The parameter decrement setting key Parameter value decrement key. The left selection key Parameters selection toward to left key. ( In constant-stitch sewing mode, long press this key, One-shot-sewing can be turned on or turned off. ) The right selection key Prameters selection toward to right key. Hdololole factory reset Insert the hole with the machine needle to touch the switch to restore the factory 3/8