Jack A5 Kataloğu — Sayfa 13

AS5 Operation Manual Safety Instruction - Please reaa tnıs manual carerully, also with related manual for the machinery before use the controller. - Forinstalling and operating the controller properly and safely, qualified engineers are required. - Please stay away from arc welding equipment, in order to avoid electromagnetic interference and malfunction of the controller. - Keep room temperature bellow 45°c and above 0°c - Do not use in humidity below 30% or above 95% or dew and mist places. - Please turn off the power and unplug the power cord, before install the control box and other components, - To prevent interference or electric leakage accidents, please make the ground work; the power cord ground wire must be securely connected to earth by an effective way. - All parts for the repair provided by the Company or approved before use. Please turn off the power and unplug the power cord before any maintenance action. There is dangerous high voltage control box, you must turn the power off after one minute before opening the control box. The symbol A\ in this manual means Safety Precautions, please pay attention to it and strictly follow it, to avoid any unnecessary damage. 1 Installation Instructions 1.1 Product specifications Product Type AHE59 Supply Voltage AC 220 200V Power frequency 50Hz/60Hz Maximum output power | 550W 1.2 Interface plug connections Connecting the plugs of pedaland machine head to the corresponding sockets at the back of controller, as Figure 1-2. Please check and confirm the plug is inserted firm Yo Fig.1-1 Controller Socket Diagram (: Pedal socket; &: Presser Foot lifter solenoid socket ; &* Solenoid socket; A A: If it is difficult toinserted plug into socket, please check whether them are matching with each other, or the inserting direction or needle insertion direction is correct! 1/8